Quick Answer
Terrain affects the setup of a plow-point tarp by requiring adjustments to the angle and tension of the tarp to ensure proper water runoff and minimize sagging. Steeper slopes may require more aggressive angle settings, while gentler slopes can tolerate a more shallow pitch.
Choosing the Right Angle
When setting up a plow-point tarp in a sloping terrain, it’s essential to consider the angle of the slope and the tarp’s pitch. A general rule of thumb is to set the tarp at an angle of 10-20 degrees, depending on the slope’s steepness. For example, if the slope is relatively flat, a 10-degree angle may be sufficient, while a steeper slope may require a 20-degree angle. It’s crucial to balance the angle with the tarp’s tension to ensure proper water runoff and prevent sagging.
Adjusting Tension
Adjusting the tension on a plow-point tarp in a sloping terrain is critical to prevent water accumulation and sagging. Start by tightening the tarp’s corners and working your way outwards, gradually increasing tension as needed. For every 10 degrees of angle increase, add about 10-20 pounds of tension to the tarp. This will help maintain a stable and water-resistant surface.
Additional Considerations
When setting up a plow-point tarp in a sloping terrain, consider using additional anchors or guy lines to secure the tarp and prevent it from shifting or sagging. This is particularly important in areas with high winds or heavy precipitation. Additionally, use a tarp with a reinforced edge or a corded edge to prevent damage from shifting or wind stress.
Find more answers
Browse the full Q&A library by topic, or jump back to the topic this question belongs to.