How to properly adjust a scope for .338 Lapua hunting?

Question

Accepted Answer

Setting the Elevation Turret When setting the elevation turret, it’s essential to use a reliable method to ensure accuracy. Use a ballistic computer or rangefinder to calculate the precise elevation adjustment required for the target distance. For the .338 Lapua, a typical adjustment range is 10-20 MOA. Start by setting the elevation turret to the calculated value and then verify the reticle position using the aiming point. Make incremental adjustments of 1-2 MOA at a time, re-checking the reticle position after each adjustment.
Compensating for Wind and Cant To accurately compensate for wind and cant, use a technique called “zeroing the windage turret.” This involves setting the windage turret to compensate for any cant or misalignment in the rifle, then adjusting the elevation turret to the ballistic solution. To do this, adjust the windage turret in 1-2 MOA increments, verifying the reticle position after each adjustment. Once the reticle is centered, you can begin adjusting the elevation turret to the ballistic solution.
Fine-Tuning the Adjustment When fine-tuning the adjustment, it’s essential to verify the reticle position using the aiming point. Use a aiming point such as an aiming dot or a ballistic reticle to ensure that the reticle is centered and stable. Make incremental adjustments of 1/4 to 1/2 MOA at a time, re-checking the reticle position after each adjustment. Repeat this process until the reticle is centered and stable, then verify the ballistic solution using a ranging device or ballistics software.