Quick Answer
Level a bow sight by aligning the center pin with the bow's aiming arrow, then adjust the windage and elevation dials in small increments, checking the sight's accuracy after each adjustment.
Choosing a Reference Point
When leveling a bow sight, it’s essential to use a consistent reference point. Aiming at a target with a large, centered dot or a bullseye is ideal. For the most accuracy, ensure the target is at least 20 yards away to minimize parallax error. Set the bow’s aiming arrow on the target and adjust the bow sight’s windage and elevation dials accordingly.
Adjusting Windage and Elevation
Start by adjusting the windage (left/right) dial first, in small increments of 1/4 to 1/2 of a click. Check the sight’s accuracy after each adjustment by firing arrows at the target. If necessary, make further adjustments. Once the windage is set, adjust the elevation (up/down) dial, also in small increments. Continue checking the sight’s accuracy after each adjustment.
Final Checks and Fine-Tuning
Once the bow sight is leveled and adjusted for windage and elevation, make a final check by firing a group of arrows at the target. Analyze the arrow group’s pattern and make any necessary adjustments. It’s also essential to check the bow sight’s accuracy at different distances and angles to ensure a consistent point of aim.
Find more answers
Browse the full Q&A library by topic, or jump back to the topic this question belongs to.