How To Ensure My Bow Is Properly Center Shot During Tuning?

Setting Cam Timing

To start the tuning process, set the cam timing to the recommended specifications by the manufacturer. This is usually around 90-110 degrees, with 100 degrees being the most common setting. You can use a protractor or a cam timing gauge to accurately measure the cam rotation. Once the cam timing is set, make sure the bow is at rest, and the nock point is aligned with the sight pin.

Paper Tuning

Next, attach a piece of paper to a target or a wall, making sure it’s smooth and flat. Shoot several arrows at the paper, focusing on the center of the target. Look for any deviations or inconsistencies in the arrows’ flight path. If the arrows are consistently landing off-center, make adjustments to the cam timing, limb tension, or arrow rest position. Repeat the process until you achieve a symmetrical arrow flight path.

Walk-Back Tuning

To fine-tune the arrow’s flight path, use the walk-back method. Start by shooting an arrow at the target, then walk back to the target while looking directly at the arrow’s impact point. Make small adjustments to the arrow rest position or cam timing and shoot another arrow. Repeat this process until the arrow’s impact point is centered on the target. This method allows for precise adjustments and helps achieve a consistent center shot.