Quick Answer
Effective doe breeding calls mimic the high-pitched bleats of a doe in heat, typically between 2-4 seconds long and around 600-800 Hz in frequency. The call should be loud and clear, but not too loud to avoid scaring off the buck. A well-timed call can bring a buck in close.
Selecting the Right Call
When selecting a call to mimic a doe breeding call, look for a high-pitched, nasal sound. A call with a frequency range of 600-800 Hz is ideal, as this is within the range of a doe’s natural bleat. Some calls may have a pre-set frequency or a adjustable pitch control, which can help you fine-tune the sound.
Technique and Timing
To effectively use a doe breeding call, experiment with different calling techniques. Start with short, high-pitched bleats, and gradually increase the length and intensity as you continue to call. Aim for a calling pattern of 2-3 seconds of calling, followed by 1-2 seconds of silence. This mimics the natural pattern of a doe in heat, and can help attract a buck from a distance. Be prepared to move quickly and quietly to get into position for a shot once the buck arrives.
Real-World Application
During peak rut, try calling in the early morning hours when bucks are most active. Use a combination of doe breeding calls and tending calls (a softer, more nasal sound) to mimic the behavior of a doe in heat. Position yourself in a location where the buck can see and smell you, but still feel safe approaching. Remember to stay quiet and still, as sudden movements can spook the buck and ruin the hunt.
Find more answers
Browse the full Q&A library by topic, or jump back to the topic this question belongs to.