Quick Answer
Yes, you can use a jet pump in a drilled well, but it depends on the well's characteristics, such as depth, yield, and water quality.
Choosing the Right Jet Pump
When selecting a jet pump for a drilled well, consider the well’s static water level, which is the height of the water column in the well. A good rule of thumb is to choose a pump with a suction lift of 25 feet or less. For deeper wells, you may need a submersible pump or a more powerful jet pump. It’s also essential to check the well’s yield, as a jet pump can be overwhelmed by high water flow rates.
Installing a Jet Pump in a Drilled Well
To install a jet pump in a drilled well, you’ll need to calculate the correct pipe sizing and depth to ensure proper suction and flow rates. Typically, you’ll want to install the jet pump above the well cap, with the intake pipe extending to a depth of 10-20 feet below the static water level. Use a 1.5-inch or 2-inch pipe for wells with low to moderate flow rates, and a larger pipe for higher flow rates. Always follow local regulations and consult a professional if you’re unsure about the installation process.
Maintenance and Troubleshooting
Regular maintenance is crucial to ensure the longevity and efficiency of your jet pump. Check the intake screen for debris and clean it regularly to prevent clogging. Also, inspect the pump’s motor and electrical connections for signs of wear or damage. If you notice reduced flow rates or increased energy consumption, it may be a sign of clogged pipes or worn-out seals. In such cases, consult a professional to diagnose and repair the issue.
Find more answers
Browse the full Q&A library by topic, or jump back to the topic this question belongs to.