Quick Answer
Seal the pitcher pump connection using a combination of a rubber gasket and a hose clamp to prevent leaks and maintain water quality.
Choosing the Right Materials
When selecting materials for sealing the pitcher pump connection, it’s essential to choose components that can withstand the pressure and corrosive nature of well water. A rubber gasket made from a durable material like EPDM (ethylene propylene diene monomer) or Viton is recommended. These materials are resistant to chemicals and can seal effectively at pressures up to 50 psi.
Applying the Seal
To apply the seal, first ensure the gasket is properly seated on the pump connection. Next, tighten the hose clamp in a star pattern to avoid rounding the clamp threads. Make sure the clamp is tightened firmly but not over-tightened, which can damage the gasket or pump connection. For a tighter seal, apply a thin layer of pipe dope or Teflon tape to the threads before tightening the clamp.
Testing the Seal
After sealing the pitcher pump connection, test it by turning the handle a few times to create pressure in the system. Check the connection for leaks by looking for signs of moisture or water flow around the seal. If the seal is leaking, reapply the gasket and hose clamp, and test the connection again to ensure a tight seal.
Find more answers
Browse the full Q&A library by topic, or jump back to the topic this question belongs to.