How to adjust sights on a .45 Colt Lever Gun for deer hunting?

Zeroing the Rifle

To begin, set the rear sight to the “3” or “4” notch for a 100-yard zero, which is suitable for most deer hunting situations. If you plan to hunt at longer ranges, adjust the rear sight accordingly. Next, use a laser or bore sight to project a dot onto a target at 100 yards. Adjust the front sight until the dot is centered, then fire a few rounds to verify the zero. Make adjustments in 1/4- to 1/2-inch increments to the front sight, as excessive corrections can throw off the rifle’s accuracy.

Fine-Tuning the Sight Alignment

To fine-tune the sight alignment, start by adjusting the front sight in 1/8-inch increments. Hold the rifle at the correct shooting position and look directly down the sights, focusing on the front sight. Make adjustments until the front sight appears to be centered in the rear sight’s notch. When making adjustments, focus on the front sight and align it with the rear sight’s notch. This will help you develop a consistent shooting technique.

Additional Considerations

When adjusting the sights, keep in mind that the .45 Colt cartridge has a relatively high muzzle velocity, which can produce a slight bullet drop at longer ranges. To compensate, you may need to adjust the rear sight to account for this bullet drop. Additionally, ensure the rifle is properly sighted in for the type of ammunition you plan to use, as different loads can affect the rifle’s accuracy and trajectory.