Quick Answer
To adjust the sight on a spring gun, level the gun and adjust the elevation by adjusting the sights until the point of impact is at the center of the target. Make adjustments in small increments, checking the impact after each adjustment. This process may require multiple attempts to achieve perfect aim.
Setting Up for Adjustment
Start by leveling the gun and ensuring it’s stable. You can use a bubble level or a laser level to get an accurate reading. Next, set the target at the desired distance, and load a pellet or BB into the gun. Use a chronograph to measure the velocity of the projectile if possible, which can affect the trajectory. For PCP guns, it’s essential to account for the kinetic energy that’s stored in the tank.
Making Adjustments
Adjust the elevation by turning the sight’s elevation adjustment knob. For most spring guns, the adjustment is 1-2 MOA (minute of angle) per click. Aim for 12-18 inches high at 20-30 yards for most small game and pest control situations. Make small increments of 1-2 MOA and check the impact after each adjustment. If the impact is too high, turn the knob clockwise; if it’s too low, turn it counterclockwise. Repeat this process until the point of impact is at the center of the target.
Fine-Tuning and Testing
Once you’ve made the initial adjustments, test the gun at multiple distances to ensure the trajectory is consistent. For spring guns, the velocity can drop significantly at longer ranges due to the energy stored in the spring. Use a chronograph to measure the velocity at different ranges and make adjustments accordingly. For example, if the velocity drops from 600 FPS to 550 FPS at 50 yards, you may need to adjust the elevation to compensate for the loss in velocity.
Find more answers
Browse the full Q&A library by topic, or jump back to the topic this question belongs to.