Can 28 Nosler cartridges be reloaded for better performance?

Optimizing Reloading Parameters

The 28 Nosler is a long-range cartridge capable of delivering high velocities and energy transfer. To achieve better performance, reloaders should focus on optimizing the powder charge. A typical starting point for the 28 Nosler is around 80-85 grains of RL-22, with a maximum charge of 90-95 grains. However, the optimal charge will depend on the specific load, barrel length, and desired performance.

Case Preparation and Bullet Selection

Proper case preparation is crucial for achieving consistent accuracy and performance. This includes ensuring the case neck is properly sized and the shoulder is square to the case head. For the 28 Nosler, a 1.340-inch case length is recommended. In terms of bullet selection, reloaders should choose a bullet that is designed for long-range shooting, such as the Hornady ELD-X or Berger VLD. These bullets feature a sleek profile and aerodynamic design that helps to minimize wind deflection and maximize accuracy.

Reloading Techniques and Considerations

When reloading the 28 Nosler, reloaders should pay attention to the neck tension and ensure that the bullet is seated firmly into place. A consistent neck tension of 30-40 pounds is recommended. Additionally, reloaders should be aware of the potential for over-pressure and ensure that their loads are within the safe operating pressure range of 65,000 psi.